Pixel TW-282/N3 Wireless Timer Remote Control for Canon

The Pixel TW-282/N3 Wireless Timer Remote Control can be used to wirelessly trigger your Canon camera from up to 100 meters away. The TW-282 allows you to take singular photos, multiple photos and photos with a customized shutter speed. If you are able to adjust the exposure time on your camera, the TW-282 allows you to manually set the exposure time up to 99 hours, 59 minutes and 59 seconds. Delay shooting is also possible with the TW-282. In the delay-shooting mode, you are able to select the number of photos you wish to take (1-99) after setting a delay of up to 59 seconds. Once the timer has counted down, the camera will begin taking the selected number of photos with an interval of 1 second. Further, it is possible to set up a timing plan whereby a delay, exposure time and the interval between photos, all of up to 99 hours, 59 minutes and 59 seconds, can be set. Within this time plan, the number of photos you wish to take can be set from either 1-99 photos or an unlimited amount which, triggers the camera to continuously take photos until you press stop. The transmitter sends a signal of 2.4GHz to 100 meters away, at up to 99 different channels. The 2 AAA batteries located within the remote, have a standby time of up to 3 years.

Features:

• Compatible with Canon EOS 10D, 1D, 1D C, 1D mk II, 1D mk II N, 1D mk III, 1D mk IV, 1D X, 1Ds, 1Ds mk2, 1Ds mk3, 20D, 20Da, 30D, 40D, 50D, 5D, 5D mk II, 5D mk III, Canon EOS 6D, 7D, D30, D60, Kodak DSC-530
• Supports timer controlled shooting mode as well as single, continuos, bulb and delayed shooting modes. Trigger camera wirelessly
• Program up to 99 timer controlled pictures
• Interchangeable cable design to allow you to use it on different brand cameras
• Reduce camera shake

Specification:

• Product Dimensions: 10 x 3.5 x 28.5 cm ; 222 g
• Boxed-product Weight: 227 g
• Batteries 2 AAA batteries required. (included)

Package Contents:

1x Pixel Timer Remote Control Wireless TW-282/N3 for Canon